HOW TO ADJUST TENSION ON BARBER SHEARS: THE DROP TEST, STEP BY STEP

Correct tension makes a shear cut cleanly and last longer. Learn the 90-degree drop test and how to set the tension on your barber shears in two minutes.

November 15, 2026 2 min read

Tension is the single most overlooked setting on a pair of shears. Get it wrong and even a brand-new, razor-sharp shear will fold hair, feel heavy or wear out early. Here is how to adjust tension on barber shears in a few minutes.

SIGNS YOUR TENSION IS WRONG

Too loose:

Hair folds or bends between the blades instead of cutting

The blades feel wobbly or click side to side

Fine hair slips out on scissor over comb

Too tight:

The shear feels stiff and tires your thumb

You hear grinding or feel drag when closing

The edges wear faster because they rub hard

THE 90-DEGREE DROP TEST

Clean the shear and wipe the pivot area.

Hold the shear by the finger ring with the tips pointing up.

Lift the thumb blade until it is open about 90 degrees.

Let go. Watch how far the blade falls.

Correct tension: the blade falls and stops about two thirds of the way closed (roughly 10–15 degrees left open).

If it closes completely, the tension is too loose.

If it barely moves, the tension is too tight.

HOW TO ADJUST IT

AQUAS MALL shears have an adjustable tension dial at the pivot, so you do not need tools.

Turn the dial clockwise to tighten and counter-clockwise to loosen.

Move one click at a time.

Repeat the drop test after each click.

Make a few test cuts on a wet tissue or hair – it should cut cleanly from pivot to tip with no folding.

If your shear uses a flat screw instead of a dial, use a coin or the correct key and turn a quarter turn at most between tests.

HOW OFTEN SHOULD YOU CHECK TENSION?

Weekly for a working barber or stylist

After dropping the shear

After oiling or cleaning the pivot

When switching between wet and dry cutting (some prefer slightly tighter for dry)

DAILY CARE THAT KEEPS TENSION STABLE

Wipe hair and moisture off the blades after each client

Add one drop of oil at the pivot at the end of the day, open and close a few times, wipe off the excess

Store the shear closed in its case

Never cut anything but hair

TENSION AND SHARPENING

Correct tension protects the edge, but every shear eventually needs professional sharpening. If your shear folds hair even after the drop test, it likely needs sharpening, not more tension. Our shear maintenance guide covers cleaning, oiling and when to sharpen.

SHEARS BUILT FOR EASY ADJUSTMENT

Every AQUAS MALL shear – the 7" cutting scissors, the 6.5" cutting shears and the 6.5" thinning shears – has a tool-free tension dial, 410-J1 stainless steel at 53 HRC and a convex edge. Got more questions? See our barber tool FAQ.

IN THIS GUIDE

Signs your tension is wrong

The 90-degree drop test

How to adjust it

How often should you check tension?

Daily care that keeps tension stable

Tension and sharpening

Shears built for easy adjustment

SHOPPING FOR SHEARS?

Compare size, blade, weight and price for all three AQUAS MALL shears.

MORE BARBER TOOL GUIDES

Barber Precision and Scissor Care: How Clean, Tuned Shears Keep Every Line Sharp

Precision is not only technique. Learn how blade alignment, tension, cleaning and storage decide whether your shears cut crisp lines or fold hair.

Choosing Professional Barber Scissors: Scissors vs Shears Buying Guide

A step-by-step guide to choosing professional barber scissors: barber shears vs hair cutting scissors, size, steel, edge, tension, handle and budget.

What Size Shears for Scissor Over Comb? 7 Inch vs 6.5 Inch Barber Shears

Scissor over comb is where blade length matters most. Here is why most barbers reach for 7 inch barber shears, and when a 6.5 inch shear is the better tool.