SHEAR MAINTENANCE: HOW TO CLEAN, OIL, TENSION AND SHARPEN BARBER SCISSORS

A daily, weekly and yearly routine that keeps professional shears cutting cleanly and doubles their working life.

September 8, 2026 2 min read

A good shear will outlast a decade of haircuts if you look after it. Most shears that get sent for sharpening are not dull at all — they are dirty, dry or wrongly tensioned.

AFTER EVERY CLIENT

Wipe the blades clean with a soft cloth. Hair, product and moisture left on the edge cause pitting, and pitting is what actually kills an edge.

END OF EACH DAY

Open the shear and wipe both blade faces from pivot to tip.

Dry completely — never leave a shear damp or in a closed pouch while wet.

Place one drop of shear oil at the pivot, open and close the shear a few times, then wipe the excess.

Store in a case or pouch, closed, away from other metal tools.

SETTING TENSION CORRECTLY

Hold the shear by the thumb ring and lift the other blade until it is fully open, then let it drop. It should close roughly two-thirds to three-quarters of the way and stop. If it slams shut, tension is too loose — that is what causes hair to fold or push instead of cut. If it barely moves, it is too tight and you are wearing the edge and your hand at the same time. Adjust the tension screw in small increments and re-test.

SIGNS YOU ACTUALLY NEED SHARPENING

Hair folds or pushes at the tip rather than cutting cleanly

You hear a scraping sound through the closing stroke

The blades no longer meet cleanly along their full length

Before sending them out, clean the shear thoroughly and reset tension. Most shears recover on the spot.

PROFESSIONAL SERVICING

A busy barber should have cutting shears professionally sharpened roughly once or twice a year — more if you cut a lot of wet, dense hair. Always use a sharpener who works on convex edges specifically; a flat-hone service will destroy a convex grind.

WHAT TO AVOID

Never cut paper, extensions tape, wet towels or anything but hair. Never drop a shear tip-first. Never store two shears loose in the same pocket.

IN THIS GUIDE

After every client

End of each day

Setting tension correctly

Signs you actually need sharpening

Professional servicing

What to avoid

SHOPPING FOR SHEARS?

Compare size, blade, weight and price for all three AQUAS MALL shears.

MORE BARBER TOOL GUIDES

Barber Precision and Scissor Care: How Clean, Tuned Shears Keep Every Line Sharp

Precision is not only technique. Learn how blade alignment, tension, cleaning and storage decide whether your shears cut crisp lines or fold hair.

Choosing Professional Barber Scissors: Scissors vs Shears Buying Guide

A step-by-step guide to choosing professional barber scissors: barber shears vs hair cutting scissors, size, steel, edge, tension, handle and budget.

What Size Shears for Scissor Over Comb? 7 Inch vs 6.5 Inch Barber Shears

Scissor over comb is where blade length matters most. Here is why most barbers reach for 7 inch barber shears, and when a 6.5 inch shear is the better tool.