CONVEX VS BEVELLED BLADES: WHICH SHEAR EDGE SUITS YOUR CUTTING STYLE

Blade type changes how a shear feels on hair. Here is when to reach for a convex edge, when a bevelled edge wins, and how thinning blades differ.

September 8, 2026 6 min read

Blade type is the single biggest factor in how a shear feels on hair — more than brand, more than price, and often more than length. Two shears with the same steel and the same handle will cut completely differently if one has a convex blade and the other a bevelled edge. This guide explains what each edge is, how it behaves on hair, which cutting techniques it suits, and how to look after it.

WHAT "BLADE TYPE" ACTUALLY MEANS

When people talk about blade type they mean two things:

The grind — the shape of the blade in cross-section, from the spine down to the cutting edge. A convex blade curves smoothly down; a bevelled blade drops at a flat angle.

The edge — the final few fractions of a millimetre where the two blades meet. It can be razor-sharp and smooth, or ground at a steeper angle, sometimes with fine serrations.

Together they decide whether the shear slices through hair or grips and chops it.

CONVEX BLADES

A convex blade is hollow-ground on the inside and curved on the outside, so it tapers to a very thin, razor-like edge. It is the classic Japanese-style shear blade.

How it cuts: the thin edge glides through hair with very little resistance. The blades slice rather than push, so the cut ends are clean and soft.

Best for:

Slide cutting and slicing — sliding a partly open shear down a section to taper it.

Point cutting into the ends for soft, invisible lines.

Dry cutting, where you need to see exactly how the hair falls.

Precision detail work on fine hair.

Things to know: a convex edge rewards good technique and a correctly set tension. Because the edge is so fine, it dislikes being forced through dense wet hair at a hard angle, and it can chip if the shear is dropped on a hard floor. It needs professional sharpening by someone who works on convex edges.

BEVELLED EDGES

A bevelled edge is ground at a flatter, steeper angle, which leaves more steel behind the edge. Some bevelled shears also have micro-serrations along one blade.

How it cuts: the steeper edge grips the hair instead of letting it slip down the blade. You feel a firmer, more positive cut.

Blunt cutting strong, solid lines.

Wet cutting, where hair tends to slide.

Scissor-over-comb, where the hair must stay in place against the comb.

Beginners who are still building a consistent tension and closing action.

Things to know: a bevelled edge is more forgiving and more durable day to day. It does not slide cut well — a serrated or steep bevel will drag or snag if you try. It is also easier and cheaper to sharpen.

THE COMBINATION: CONVEX BLADE WITH A BEVELLED EDGE

Many professional shears — including all AQUAS MALL shears — use a convex blade finished with a bevelled cutting edge. You get most of the glide of a convex grind for slicing and point cutting, with the strength and grip of a bevel for blunt and wet work. For barbers who cut all day on mixed hair types, this is the most practical middle ground: one shear that handles almost every service without babying.

THINNING AND TEXTURIZING BLADES

A thinning shear is a different animal. It pairs one toothed blade with one straight blade, so it only cuts the hair caught between the teeth. Tooth count controls how much weight comes out:

Fewer, wider teeth remove more bulk and add separation.

More, finer teeth blend and soften lines.

The straight blade on a good thinning shear should itself be a sharp convex edge, so it slices instead of pushing hair down between the teeth. Use thinning shears for weight removal at the interior, blending clipper lines, and finishing — never for the baseline of a haircut. Our guide on how to use hair thinning shears covers technique in detail.

MATCHING BLADE TO WORK

Blunt lines, wet cutting, scissor-over-comb: bevelled edge.

Slide cutting, point cutting, soft ends: convex blade.

All-day mixed barbering: convex blade with a bevelled edge.

Bulk removal and blending: toothed thinning shear.

HOW STEEL AND HARDNESS AFFECT THE EDGE

An edge is only as good as the steel behind it.

Steel grade. 410-J1 stainless steel is a Japanese-grade steel widely used in professional shears. It takes a fine edge and resists corrosion from water, product and disinfectant.

Hardness (HRC). Hardness is measured on the Rockwell C scale. Harder steel holds an edge longer but becomes more brittle. Around 53 HRC is a good working balance for daily barbering: it holds a sharp convex edge through regular use and is tough enough to survive the odd knock.

HOW TO TELL WHICH EDGE YOUR SHEAR HAS

Look at the blade in profile. A convex blade shows a smooth curve from spine to edge. A bevel shows a distinct flat facet along the edge.

Run a strand of wet hair along the open blade. A convex edge lets it slide; a serrated bevel grips it.

Try a slide cut on a tress. A convex edge glides smoothly. A bevelled or serrated edge drags.

CARING FOR EACH EDGE

Wipe after every client. Hair, water and product left on the blade dull the edge and cause pitting.

Oil the pivot daily. One drop of shear oil keeps the blades closing smoothly so the edges do not grind against each other.

Set tension correctly. Too loose and the blades fold hair; too tight and the edges wear fast. Our shear maintenance guide shows the drop test.

Never cut anything but hair. Paper, foil and wig fibre blunt a convex edge immediately.

Use a specialist for sharpening. Convex edges need a sharpener who works on convex grinds; a flat-wheel sharpen turns a convex edge into a bevel.

WHICH AQUAS MALL SHEAR SUITS YOU

All three AQUAS MALL shears use 410-J1 stainless steel at 53 HRC, a convex blade with a bevelled edge, and are hand crafted and hand finished:

AQUAS MALL 6.5" Professional Hair Cutting Shears — the all-rounder for detail, point cutting and mixed work.

AQUAS MALL 7" Professional Hair Cutting Scissors — longer reach for scissor-over-comb and long blunt lines.

AQUAS MALL 6.5" Professional Hair Thinning Shears — toothed blending blade for weight removal and soft finishes.

Not sure about length? Read 6.5" vs 7" hair cutting shears, or compare all three on the pricing and specs page.

QUICK ANSWERS

Is a convex blade better than a bevelled one? Not better — different. Convex slices and suits slide cutting; bevelled grips and suits blunt and wet cutting. A convex blade with a bevelled edge does both well.

Can I slide cut with a bevelled shear? Not well. A bevel, especially a serrated one, drags on a slide cut.

Do convex shears need more care? A little. Keep them oiled, tensioned and away from hard floors, and use a convex specialist for sharpening.

Why do professional shears cost more than household scissors? Steel grade, hardness, the convex grind and hand finishing all take more material and time — and they are what make the shear cut hair cleanly instead of bending it.

IN THIS GUIDE

What "blade type" actually means

Convex blades

Bevelled edges

The combination: convex blade with a bevelled edge

Thinning and texturizing blades

Matching blade to work

How steel and hardness affect the edge

How to tell which edge your shear has

Caring for each edge

Which AQUAS MALL shear suits you

Quick answers

SHOPPING FOR SHEARS?

Compare size, blade, weight and price for all three AQUAS MALL shears.

MORE BARBER TOOL GUIDES

Barber Precision and Scissor Care: How Clean, Tuned Shears Keep Every Line Sharp

Precision is not only technique. Learn how blade alignment, tension, cleaning and storage decide whether your shears cut crisp lines or fold hair.

Choosing Professional Barber Scissors: Scissors vs Shears Buying Guide

A step-by-step guide to choosing professional barber scissors: barber shears vs hair cutting scissors, size, steel, edge, tension, handle and budget.

What Size Shears for Scissor Over Comb? 7 Inch vs 6.5 Inch Barber Shears

Scissor over comb is where blade length matters most. Here is why most barbers reach for 7 inch barber shears, and when a 6.5 inch shear is the better tool.